Which countries does Click’n Tile ship to?
From our warehouse in Denmark, we ship to:
The entire EU, Norway, Liechtenstein, Switzerland, UK, Turkey, Canada, Mexico, USA, Philippines, Japan, China, Malaysia, Singapore, Thailand, Australia, Argentina and Brazil.
We sell to Iceland, Faroe Islands, Greenland and Canada via our resellers.
What do you do if you want to see a color?
You have the option to buy the tiles as individual pieces and thus experience the colors you want in your own home. When you only buy tiles as a single piece, the transport price is greatly reduced.
In addition, each picture in our webshop has an NCS code. NCS code is the color standard within the color industry. If you type the code into https://www.ncscolorguide.com you can see the color in bigger perspective. But be careful because calibrating your screen can change how the color is experienced.
Where can Click’n Tile be used?
Click’n Tile can be used anywhere, as long as it is not in a wet room zone (e.g. in the shower niche), on the floor or outside.
How big is each tile and what is the total thickness (including mounting plate)?
Click’n Tile tiles are available in two variants. A 10×10 cm tile and the metro tile which is the 13.3×6.6 cm tile. The thickness of the tile including mounting plate and adhesive is approx. 8.2 mm.
Can I combine 10×10 and the Metro tile?
You can easily do that. In length, 3 pieces correspond. subway tiles for 4 pcs. 10×10 tiles, and the height corresponds to 5 pcs. metro tiles also for 4 pcs. 10×10 tiles.
Can the mounting plate be glued on top of regular tiles?
Yes, the mounting plate can be glued to glazed tiles, raw tiles, wood, profiled boards, painted, upholstered, felt and raw walls. The only thing you have to be sure of is that the substrate is load-bearing (not loosely fitting) and cleaned. The rougher/uneven the surface, the more glue you use. Remember that the result will not be better than the substrate.
How to remove excess glue?
If you want to remove the mounting plate, the glue will most likely still be on the wall. The glue can be removed with a knife, after which the wall must be puttyed and painted.
Can I mount the back plate with double-sided tape?
You can do that, and the tape can be bought in our webshop. The “weak element” of double-sided tape is not the tape, but rather the surface of the wall. We therefore recommend when mounting on a painted wall that you also fasten the mounting plate firmly in the corners with a staple gun.
What do I do with joints?
Click’n Tile has no joints and is therefore easy to remove. If you look at the tiles from the side, you will be able to see that they sit close to the mounting plate, but also that there is a 1.2 mm crack at the top.
Can Click’n Tile be used in a food business?
Yes, but since the Danish Food Agency requires that “the walls in production rooms or areas should be covered with a smooth material that is waterproof and washable”, the crack between the tiles must be filled with sanitary silicone or epoxy grout.
How do I wash the tiles?
With ordinary universal cleaner. It is not recommended to use scouring agents, as it will polish the surface.
Can I wash the tiles in the dishwasher?
Yes just make sure that the temperature is below 42 degrees.
Can the tiles withstand heat from hobs?
Yes, they can. If you have a gas hob, make sure there is a minimum of 3 cm from the edge of your hob and cooking utensils to the tiles.